- OFT-4212R Fiber optic 4 channels optical test station The OFT4212R is a fully automated connector assembly test station featuring a set of light sources, an Optical Return Loss module, a four-channel power meter, and a user-friendly control unit with a touch display. This system offers graphical guidance for testing connectors, allowing serial numbers to be entered manually or via a QR code reader. Measured values are color-coded in GREEN for within range and RED for warnings, enabling easy repetition of tests if needed. All data is automatically stored on a local SSD. It is ideal for testing connector insertion loss at 1310, 1490, 1550, and 1625 nm, as well as return loss at 1310 and 1550 nm.
- OFT-4212-MCMU Fiber optic 16 channels test station OFT-4212-MCMU is a connector assembly test station, equipped with set of Light sources, Optical Return Loss module, 16 channels power meter and control unit with touch display. This solution provides full automated test of connector with graphical guidance. Serial numbers of tested connectors can be entered manually or by QR code reader. Measured values are checked if they are within expected range, then displayed in GREEN or RED color as a warning. If there is a warning, the measurement can be easily repeated. All measured data are automatically stored on local SSD.
- OFT-4212 Fiber optic 4-channels optical testing system The OFT-4212 is an advanced optical power monitoring and testing system designed for long-term measurement of time-dependent changes in optical power levels. Featuring four input channels, it includes a power meter, light source, and the Optical Power Monitor software, enabling simultaneous monitoring of multiple wavelengths. It allows for both absolute and relative optical power measurements across four optical fibers, with data logged with timestamps for easy report generation and export. Additionally, the system is equipped with a 650 nm visible light source for fiber visual checks.
- PLS-30 Precise Optical Light Source The PLS-30 includes the precise optical light sources designed for laboratory use. The customized design allows implementation of required optical sources in a 1U frame, which can be installed inside a 19” rack or used as a desktop in wide range of fiber testing systems. The PLS-30 provides an automatic power control loop to keep output power constant. The light source output ports are available on the front panel in separate FC/APC (SM) or FC/PC (MM) connector adapters or in one common port, with a switchable wavelength using an internal optical switch. The removable connector adaptor design allows the simple exchange of optical output adapters and easy maintenance and cleaning of the output connector ferrule after removing the connector adaptor.
The development and production of fiber optic transmission system elements requires laboratory-grade equipment. Laboratory equipment for FOCL includes specialized modular platforms with a wide variety of high-precision modules. By cascading the modular platforms, from one to one hundred interchangeable modules can be installed.