-
Passive fiber optic components
-
Fiber optic patchcords
-
Patch cords with LC, SC, FC, ST connectors Patch cords with LC, SC, FC, ST connectors provide high quality and reliability. Manufactured according to IEC and TELCORDIA standards, they are suitable for single-mode and multi-mode applications. Length from 0.5 to 100 meters.
-
Optical patch cord with SN connectors Type SN® Optical Connector is a new duplex connector for 400G speeds and space optimization in data centers.Provides individual and independent duplexing of optical fiber in transceiver type (QSFP, QSFP-DD, OSFP) as a more efficient, reliable and lower cost alternative to the MPO connector.
-
Optical patch cord with CS connectors The CS® connector was introduced as a replacement for current duplex LC connectors, which are too large for newer generation transceiver interfaces and to increase connector density in patch panels. The CS® connector features a push-pull mechanism with two cylindrical, spring-loaded 1.25 mm ferrules within a single housing.
-
LSH Patchcord The LSH connector patchcords are designed for both multimode (MM) and single-mode (SM) applications, available with PC and APC polishing methods. The integrated protective cap made from zinc alloy protects the ferrule from dust and prevents any laser light emissions. The LSH connector is compatible with E2000™ connector standards and is available in a high-power version.
-
Optical patch cord with MPO connectors (MTP) MPO connector with MT (Mechanical Transfer) multifiber ferrule for multiple optical fibers (most often 12 or 24). MPO connectors allow simultaneous connection of several optical fibers, so they are used in parallel data transmission systems, as well as in high-speed data transmission networks, such as data centers and backbone communication channels
-
Optical patch cord with MT-RJ connectors The MT-RJ is a compact, bi-directional, multi-fiber optical connector in a single housing that is ideal for use in multi-mode data networks. Due to its reliability and compact size (the size of a traditional RJ-45 connector), it is often used for short-distance data transmission, and MT-RJ has become popular with switches, routers, servers, and subscriber terminal equipment.
-
Optical patch cord with SMA connectors SMA connectors are specially designed for multimode data communication applications. These connectors are fully compatible with existing SMA hardware and offer high precision with pre-polished ceramic or metal ferrules. They feature precision-controlled ferrule length and are available in long, short, and 900 µm buffered fiber boot styles. The connectors come with either metal or polymer coupling nuts and are field installable.
-
Optical patch cord with MU connectors MU fiber connectors are a high-density solution for high-performance telecommunications networks. This connector is half the size of the standard SC connector, which allows for a higher port density in telecommunications systems. MU type optical connectors comply with IEC 61754-6 standard, which ensures compatibility and use with a variety of telecommunication devices and systems.
-
Optical patch cord with protected connector HE-IP67-XX The new efficient and cost-effective HE-XX series of harsh environment connectors are designed for industrial networks, FTTH (fiber to the home), FTTA (fiber to the antenna) and other projects operating in harsh environments.
-
Sealed waterproof connector for antenna connection OPTOKON introduces a new efficient series of connectors for harsh environments, the HA series, which is designed for FTTH and FTTA (Fiber To The Antenna) projects. Pre-connected cables significantly reduce cable installation time, saving costs and speeding up the connection of FTTH, FTTA and various industrial systems.
-
AFOP armored optical patch cords The armored optical patch cord is designed for simple and easy installation of equipment, similar to a standard electrical cable. The unique design ensures a simple installation process and reduced return losses, as well as extending the service life of the optical fiber.
-
Multi-fiber optical patch cords MFP Multi-fiber patch cords can be pre-installed in optical distribution cabinets to reduce installation time on site. All multi-fiber patch cords are available for both single-mode and multi-mode applications with all types of connectors.
-
Reference “master” patchcords A wide range of pre-terminated cable assemblies that are 100% tested to meet your requirements. These assemblies are used for measuring and manufacturing fiber optic components and testing optical networks. The master patch cord is equipped with a main connector in accordance with the specifications below.
-
MC patch cords (Singlemode-Multimode transition) MCP patch cords for single-mode Gigabit Ethernet applications connected to a multimode line. This patch cord consists of specially designed connectors at each end of the cable assembly and a special scrambler at the connection point with the multimode fiber. This patch cord optimizes the launch characteristics of single-mode LX transceivers (1300 nm) used for Gigabit Ethernet and designed to operate on both single-mode and multimode fibers.
-
Polarization maintaining (PM) optical patch cords Single-mode polarization-maintaining (PM) optical patch cords are suitable for use in a number of highly specialized applications, such as interferometric sensors, systems with polarization-sensitive components, and applications requiring high-speed data transmission. FC and SC connectors with UPC and APC polishing are available.
-
-
Optical connectors
-
Fiber optic adhesive connectors LC, SC, FC, ST Optical connectors are used for the production of optical patch cords/pigtails. They are used to terminate optical fiber and cable for further connection to passive or active elements of an optical network. The most commonly used connectors are SC, FC, LC, and ST.
-
QUICK-CURE™ Splice On Connector The pre-polished connector (SC, LC type) is designed for terminating optical fiber, especially in FTTH projects, directly at the end user's location. With a tool kit containing all the necessary tools, it is easy to install an optical network. Termination without the use of epoxy resin, without heating, without polishing, and without welding provides the same excellent transmission parameters as standard polishing and welding technology.
-
Bare fiber connectors A pass-through connector for bare fiber is a device for quick mechanical connection to optical fiber (single-mode or multi-mode) in a primary coating of 250 μm or a buffer coating of 900 μm. Its main application is input control of optical cable and temporary restoration of optical line operability.
-
Explosion-proof connectors The explosion-proof Geo-BeamTM EX series has been designed in accordance with the requirements of the ATEX IECEx 60079 standard for use in Zone 1 and Zone 2 hazardous environments.
-
-
Connecting adapters
-
Fiber optic connection adapters Optical adapters (optical sockets) are used for detachable connection of optical fibers. Fibers terminated with connectors are connected and fixed by an optical socket (adapter), which allows creating a reliable and durable connection. Some pass-through adapters are also manufactured in a dual form (so-called duplex), when a pair of optical adapters are combined in one housing.
-
Hybrid adapters OPTOKON hybrid adapters are the solution for systems where small form factor devices need to be integrated into an existing environment or connected to each other. The innovative compact design and high-precision contact elements ensure a reliable connection with low insertion loss and high return loss characteristics. Hybrid adapters are available in FC-LC, FC-SC, FC-ST, SC-ST, SC-LC, and LC-ST standards. OPTOKON can also develop custom adapters upon request.
-
MPO type adapter (pass-through connector) Reliable MTP adapters that provide fast connection to up to 24 optical fibers. MTP adapters are suitable for connecting multi-fiber MTP/MPO connectors. Connection density is ensured by adapter locks, which are secured by a spring-loaded sliding mechanism on the MTP/MPO connector plug.
-
Adapter (pass-through connection) type E2000-LSH LSH adapters are designed for PC and APC polished connectors. The integrated LSH protective cap protects the tip from dust and eliminates any laser radiation. The single type is equipped with a metal inner shutter. The LSH adapter is compatible with E2000TM connectors.
-
MT-RJ type adapter (pass-through connector) MT-RJ connectors are designed with the latest advances in precision molding and multi-fiber connector technology, providing the end user with an optical interface that is easier and more cost-effective to install.
-
SMA type adapter (pass-through connector) SMA adapters are specially designed for multimode data transmission. SMA adapters are fully compatible with existing SMA equipment.
-
MU type adapter (pass-through connector) The MU high-density fiber optic connection system offers a new solution for high-performance telecommunications networks. The MU adapter is at least half the size of a standard SC adapter. It can offer twice the port density, as well as all the optical characteristics of traditional fiber optic connectors.
-
-
Attenuators, terminators
-
-
Telecommunication equipment
-
Industrial equipment
-
Optical distribution systems
-
Measurements and tools
-
Laboratory measuring equipment
-
OFT-4212R Fiber optic 4 channels optical test station The OFT4212R is a fully automated connector assembly test station featuring a set of light sources, an Optical Return Loss module, a four-channel power meter, and a user-friendly control unit with a touch display. This system offers graphical guidance for testing connectors, allowing serial numbers to be entered manually or via a QR code reader. Measured values are color-coded in GREEN for within range and RED for warnings, enabling easy repetition of tests if needed. All data is automatically stored on a local SSD. It is ideal for testing connector insertion loss at 1310, 1490, 1550, and 1625 nm, as well as return loss at 1310 and 1550 nm.
-
OFT-4212-MCMU Fiber optic 16 channels test station OFT-4212-MCMU is a connector assembly test station, equipped with set of Light sources, Optical Return Loss module, 16 channels power meter and control unit with touch display. This solution provides full automated test of connector with graphical guidance. Serial numbers of tested connectors can be entered manually or by QR code reader. Measured values are checked if they are within expected range, then displayed in GREEN or RED color as a warning. If there is a warning, the measurement can be easily repeated. All measured data are automatically stored on local SSD.
-
OFT-4212 Fiber optic 4-channels optical testing system The OFT-4212 is an advanced optical power monitoring and testing system designed for long-term measurement of time-dependent changes in optical power levels. Featuring four input channels, it includes a power meter, light source, and the Optical Power Monitor software, enabling simultaneous monitoring of multiple wavelengths. It allows for both absolute and relative optical power measurements across four optical fibers, with data logged with timestamps for easy report generation and export. Additionally, the system is equipped with a 650 nm visible light source for fiber visual checks.
-
PLS-30 Precise Optical Light Source The PLS-30 includes the precise optical light sources designed for laboratory use. The customized design allows implementation of required optical sources in a 1U frame, which can be installed inside a 19” rack or used as a desktop in wide range of fiber testing systems. The PLS-30 provides an automatic power control loop to keep output power constant. The light source output ports are available on the front panel in separate FC/APC (SM) or FC/PC (MM) connector adapters or in one common port, with a switchable wavelength using an internal optical switch. The removable connector adaptor design allows the simple exchange of optical output adapters and easy maintenance and cleaning of the output connector ferrule after removing the connector adaptor.
-
-
Fusion splicers and fiber cleavers
-
OSC-700 Single Fiber Fusion Splicer The OPTOKON OSC-700 is an automatic fusion splicer for SM, MM, DS, NZ-DS (G655), EDF and other fibers. The OSC-700 can ensure high-quality splicing even in the most unfavourable environmental conditions. The OSC-700 splicers are suitable for core or cladding alignment. Using one of these methods the two cleaved fibers are automatically aligned by the fusion splicer in the X, Y plane, then are fused together. The bare fiber area is protected either by recoating or with a splice protector. A splice protector is a heat shrinkable tube with a strength member and less loss.
-
OCL-610 Fiber Cleaver The OPTOKON OCL-610 series high precision fiber cleaver is the highly-precision fiber cutting tool, suitable for 200 µm up to 900 µm coating fiber and 125 µm cladding fiber.
-
OCL-100 Fiber Cleaver The OPTOKON OCL-100 series high precision fiber cleaver is the highly-precision fiber cutting tool, suitable for 200 µm up to 900 µm coating fiber and 125 µm cladding fiber. The 16-position blade is workable for 48 000 fiber cleaves. It is easy to use and maintenance.
-
-
Fiber power meters and light sources
-
PM-215E Pocket optical power meter - USB probe The PM 215E optical power meter is a small, pocket size low cost item. The small size does not prevent the optical meter fulfilling all technical requirements for field equipment. The tester can be used as pocket power meter or as USB probe, part of testing workstation. It can be placed within rack mount ODF’s with the display on the top or on the side. The Li-Pol rechargeable battery ensures long term working time with a minimum life time of 2 years. The unit is able to store measurement data which can be uploaded to PC
-
LS-215E Pocket optical light source The LS-215E optical Light Source is a compact and cost-effective device that meets all essential technical requirements for field equipment. It operates at wavelengths of 850/1300 nm for multimode or 1310/1550 nm for single mode applications. The rechargeable battery ensures prolonged operation with a minimum lifespan of 2 years. The batteries can be conveniently charged using a USB port or an external AC/DC adaptor.
-
PM-830-FTTX Optical Power Meter The PM-830-FTTX Optical Power Meter and LS-830-FTTX Optical Light Source are designed for efficient testing and maintenance of FTTH-PON networks. The PM-830-FTTX measures and displays voice, data, and video signals simultaneously, while the LS-830-FTTX provides three wavelengths for comprehensive testing. Both devices feature rechargeable batteries, compact design, and user-friendly interfaces, making them ideal for field use.
-
Optical testers LS/PM-800 The PM-800N Optical Power Meter and LS-800N Light Source are part of OPTOKON's advanced test equipment designed for comprehensive fiber line diagnostics. The PM-800N measures absolute or relative optical power in optical networks and can function as a portable power meter or USB probe. It features automatic wavelength detection, cycle mode, and a rechargeable Li-Pol battery with a minimum lifespan of 2 years.
-
LS/PM-240 Ribbon Fiber Optical Testers The PM-240-MTP Multifiber Optical Power Meter and LS-240-MTP Multifiber Optical Light Source are essential tools for testing and maintaining optical networks with MTP/MPO connectors. The PM-240-MTP measures absolute or relative optical power in both SM and MM fibers, recognizing “live” and “dark” fibers, and eliminating the need for fan-out connectors.
-
PM-212 Pocket optical power meter The Optokon PM-212 optical power meter is a compact (pocket-sized) and inexpensive device. Despite its small size, the PM-212 meets all technical requirements for field equipment.
-
PM-4212 – Compact 4 Port Optical Power Meter The PM-4212 is a 4-port portable optical power meter. Despite its small size, it meets the operational requirements of a full-size tester. The power meter is designed for simultaneous measurement of up to 4 single-mode or multimode fibers. All four input interfaces are equipped with 1mm InGaAs photodetectors and changeable ADP adapters for a wide range of single-mode and multimode fiber connectors.
-
-
Fiber optic Loss Test Set
-
OFT-820N Loss Test Set The OFT-820N series optical Loss Test Set combines two optical test equipments – Light Source and Power Meter in the same box. The optical Light Source fulfills all the necessary technical requirements for field equipment. Available in various working wavelengths combinations: 850, 1300, 1310, 1490, 1550 and 1625 nm. The optical Power Meter is designed to measure absolute or relative optical power in optical networks. The changeable adaptor design allows the simple exchange of optical connectors according actual need.
-
OFT-840 Loss Test Set with RL The OFT-840 series optical Loss Test Set with optical Return Loss (RL) combines optical Light Source, Power Meter and Return Loss testing in the same box. The optical Light Source fulfills all the necessary technical requirements for field equipment. Available in two working wavelengths: 1310 or 1550 nm. The optical Power Meter is designed to measure absolute or relative optical power in optical networks.
-
OFT-850 Hybrid Cable Tester The OFT-850 set consists of a SOURCE and TESTER unit. This hybrid cable tester is designed for testing loss in optical fibers and checking the continuity of copper pairs in hybrid cables. It combines an optical light source on one side, an optical power meter on the other side, and a copper wires checker. It is ideal for testing hybrid systems based on cables that include both optical fibers and copper wires.
-
-
Microscopes and defect localizers
-
FOI-400W - Fiber Optic Microscope WiFi Version The fiber end face inspector is designed for ferrule end face inspection with excellent performance and convenient operability. It magnifies the object by 260 to 400 times, making it easier to assess the status of the fiber end face. The compact size makes it the ideal tool for connector end face inspection before and during fiber network installation.
-
VSP-03 Visible Pen The Visible Pen is used to check or identify singlemode and multimode optical fibers & components. The universal adapter is suitable for every 2.5 mm or 1.25 mm fiber optic connector. The small, compact and handy housing makes the device suitable for daily use.
-
-
OTDRs and accessories
-
MOT-200 Mini OTDR Series The MOT-200 series Optical Time Domain Reflectometer (OTDR) is a state-of-the-art, intelligent device designed for fiber communication system detection. As optical networks continue to expand in both urban and rural areas, the need for precise and efficient measurement tools has become essential. The MOT-200 is specifically designed to meet these needs, offering exceptional performance at a cost-effective price.
-
MOT-500 Mini OTDR Series Оптичний рефлектометр у часовій області (OTDR) серії MOT-500 - це інтелектуальний вимірювач нового покоління для виявлення оптоволоконних систем зв'язку. З популяризацією оптичної мережі, встановленої в містах і сільській місцевості, вимірювання оптичної мережі стає коротким і розсіюється; MOT-500 спеціально розроблений для такого застосування.
-
OLC-D OTDR Launch Cable If you are installing an outside plant network such as a long distance network or a long campus LAN with splices between cables, you will want an OTDR to check if the fibers and splices are good. The OTDR can see the splice after it is made and confirm its performance. It can also find stress problems in the cables caused by improper handling during installation.
-
OLC-M Mini OTDR Launch Cable The OLC-M Mini OTDR Launch Cable is an essential tool for verifying the integrity of fiber optic networks, especially in long-distance or campus LAN installations with splices. This compact, pocket-sized launch cable is designed for easy handling and portability, making it ideal for field use. It helps ensure accurate OTDR measurements by eliminating the "Dead Zone" caused by reflections from the OTDR's own connector.
-
-
-
Production of optics
-
Secure Network and Military equipment
-
Perimeter security
-
Active equipment of tactical networks
-
LMES 230 V AC / 24 V DC power supply-for harsh operating conditions OPTOKON LMES is an industrial power supply designed for stable voltage conversion from 230 V AC to 24 V DC with power distribution over 8 independent channels. The device combines an AC/DC converter and a junction box, providing power to up to 20 A of total current.
-
OPTOKON LMSP - 10.B is a rugged 10-inch computer (Rugged All-in-One System) OPTOKON LMSP — 10.B is a secure embedded computer system with an integrated 10-inch high-resolution display designed for use in ground and aircraft transportation systems.
-
LMRS-1A / LMRS-TD Nuclear Radiation Sensors OPTOKON LMRS-1A and LMRS-TD are highly reliable nuclear and ionizing radiation sensors designed to detect, measure and monitor radiation levels in real time.
-
OPTOKON AIRDA / XARDA - Secure Display terminal (Ruggedized Display Assistant) The OPTOKON AIRDA/XARDA is a secure 10—inch intelligent display designed for use in military vehicles, armored vehicles, and aviation systems.
-
OPTOKON OEDX-20 - digital intercom system for vehicles OPTOKON OEDX-20 is a digital intercom system specifically designed for armored vehicles, military and special vehicles operating in harsh environments.
-
Lightweight Mobile LMDS Data Switch LMDS is a Lightweight Mobile Data Switch in a portable case, powered by a built-in UPS. Both devices meet the required IP protection class. It can be powered by 230V AC mains or 24V DC. The batteries have a state monitoring feature - a transparent window on the lid.
-
LMC-01-GCS Gigabit Ethernet Mini Media Converter Ruggedized Typ The LMC-01-GCS is a ruggedized Gigabit Ethernet mini media converter designed for harsh environments. It features HMA Expanded Beam connectors and rugged D38999 18-pin connectors, ensuring reliable performance in demanding applications.
-
LMCP-7H Compact, ultra-durable server The OPTOKON compact ultra-durable server LMCP-7H is equipped with Intel® CPU, M2 on board disc, one removable SSD disc and up to 6 routed Gigabit Ethernet ports. The LMCP-7H supports up to 64 GB of DDR4 memory, resulting in a reduction in overall power consumption compared to DDR3-based servers.
-
LMCP-28H-NG Light Mobile Computing Platform The OPTOKON introduces the LMCP-28H-NG new generation of highly versatile mobile computing platform which delivers a powerful and rugged network router, network switch, server and VoIP call manager in a single low-SWaP device. As the center of the mobile data network, it provides an integrated and versatile communications server for military, public safety, C4ISR and other network-centric communications systems.
-
LMSW-E33 Ruggedized 1-10 Gigabit Ethernet Layer 2 Managed PoE Switch The OPTOKON® LMSW-E33 ruggedized switch based on Cisco® Embedded Service Switch (ESS) 3300 extends switching capabilities to mobile and embedded networks that operate in extreme environments. The flexible, compact form factor of the switch, powered by Cisco IOS® Software, provides highly secure data, voice, and video communications to stationary and mobile network nodes, making it ideal for use in harsh environmental conditions.
-
LMSW-83M Ruggedized Gigabit Ethernet Layer 2 Managed PoE Switch The LMSW-83M is a ruggedized Gigabit Ethernet Layer 2 managed PoE switch designed for demanding military and industrial environments. It features 3 Fiber optic HMA-J ports and 8 10/100/1000Base-X RJ-45 ports, ensuring reliable and high-speed connectivity.
-
Ruggedized Ethernet Media Converters The LMC series of ruggedized Ethernet media converters are designed for harsh environments, providing reliable and high-speed connectivity. These converters support both Gigabit and Fast Ethernet, featuring robust metal housings and expanded beam connectors for fiber optic cables. Ideal for military, aerospace, broadcasting, petrochemical, and industrial applications, they ensure mobility, easy installation, and mechanical resistance necessary for tactical deployment.
-
LMSB-14-1G Ruggedized Switchboard Extension Gateway The LMSB-14-1G is a ruggedized switchboard extension gateway designed for harsh environments. It can be used as an analog VoIP gateway, VoIP (ISDN) PBX, or voice & data router, providing reliable communication solutions.
-
LMUPS-80-24V Ruggedized Uninterruptible Power Supply The LMUPS-80-24V is a ruggedized uninterruptible power supply designed for harsh environments. It provides high efficiency, DC power supply, and battery charging capabilities, ensuring continuous power.
-
LMIPT-41 High-Class Rugged IP Phone The LMIPT-41 is a high-class rugged IP phone designed for harsh environments. Built on proven Cisco technology, it features five programmable line keys, encrypted voice communications, and a widescreen VGA backlight color display.
-
LMSR-R63 Ruggedized Next-Gen Gigabit Router The LMSR-R63 is a ruggedized next-gen Gigabit router designed for harsh environments. It features 2x GE WAN and 4x GE LAN ports with PoE, providing secure and reliable communication.
-
-
Passive Components for Ruggedized and Military Networks
-
Hermaphroditic connectors with physical TFOCA contact TFOCA optical cables are designed to connect tactical network nodes using optical fiber cables. The advanced technology used retains all the advantages of optical transmission in harsh field environments.
-
Field patch cords of the HMA-JF series of ferulic type The HMA-JF connector complements the existing wide range of heavy-duty products. The HMA-JF uses a 1.25mm ferule design that has already proven itself in both single-mode and multimode systems. The HMA-JF is ideal for long-range military applications where excellent transmission parameters are required.
-
Hybrid Field Optical Patchcord HMA The OPTOKON HMA-S hybrid patch cord is made on the basis of a heavy-duty elastic cable terminated with HMA-S hybrid connectors with Expanded Beam optical fiber and copper cores. It is intended for applications where data transmission over optical fiber is required and at the same time power is required for connected devices. It is suitable for military tactical systems, FTTA applications, video surveillance systems or for connecting mobile devices.
-
OPTOKON MCS Series — Mini Cable Splice for Optical Cables (MCS-02 / MCS-04) The OPTOKON MCS series are compact and reliable connectors for quick repair and splicing of tactical optical cables in the field. The MCS-02 and MCS-04 models provide an easy and fast mechanical connection of 2 or 4 fibers without the need for power, heating or complex tools.
-
OPTOKON HMA Patchcord The OPTOKON HMA patchcords utilize advanced Expanded Beam Technology, ensuring superior data transmission even in harsh environments. Designed for military, industrial, and broadcasting applications, these connectors offer robust performance with minimal maintenance. Hermaphroditic design allows for quick deployment and reliable connections.
-
Cable reels for transporting and storing optical patch cords OPTOKON offers high - quality cable reels. You can choose the appropriate design and style for a particular solution. The drums are ideal for military, industrial and language applications. All drums are supplied with a third flange that provides full access to each end of the cable assembly.
-
FCON Series 2-12 Fibers Rugged Field Ferrule Connector Patchcord The FCON Series rugged field ferrule connector patchcords are designed for military and industrial applications, offering stable connections with up to 12 fiber channels. These connectors support both single-mode and multi-mode fibers, ensuring reliable performance in harsh environments.
-
LMCAB Series Ethernet Ruggedized Patchcords LMCAB Series Ethernet ruggedized patchcords are designed for high-speed data transmission in industrial and military environments. These Category 5e cables meet EIA/TIA-568B standards and feature ruggedized RJF6MG connectors. Ideal for applications requiring durability and reliable performance under harsh conditions.
-
SMPTE LEMO FUW and PUW Patchcords SMPTE LEMO FUW and PUW patchcords are designed for HDTV systems, featuring high-quality LEMO connectors with protective elastomer sleeves. These cables ensure reliable audio and video signal transmission over long distances and power system cameras. Ideal for use with SONY, JVC, Panasonic, Grass Valley, and Blackmagic equipment.
-
LMCAB Ruggedized Cable Assemblies LMCP ruggedized cable assemblies are designed for high-speed data transmission in industrial and military environments. These cables meet EIA/TIA-568B standards and feature robust connectors for reliable performance under harsh conditions. Ideal for applications requiring durability and high data integrity.
-
-
Equipment for measurement and maintenance of tactical networks
-
OPTOKON OMK-SR-CLN.2 Fiber Optic Connector Cleaning Kit OPTOKON OMK-SR-CLN.2 Maintenance Clean Kit is a professional kit for cleaning and inspection of fiber optic connectors. It is designed for use in difficult environments — in military, industrial and telecommunication networks.
-
Optical Fiber Repair Kit Optokon SR-SPL-2 OPTOKON OMK-SR-SPL.2 Quick Repair Tool Kit is a set of tools for operational repair of tactical optical cables in the field. The case is made of high-strength copolymer polypropylene, equipped with a valve for automatic pressure equalization, complies with the IP67 standard and military standards.
-
A professional set of tools for installation and repair of fiber-optic communication lines UNI-2 The OPTOKON OMK-SR-UNI kit.2 is a universal kit for the installation and repair of fiber optic connectors in difficult conditions. It is designed to work in field, industrial or military environments where maximum reliability and resistance to external factors are required.
-
Diagnostic kit for fiber optic networks OMK-SR OTS-2 The OPTOKON OMK-SR-OTS.2 Diagnostic Set (hereinafter referred to as the "kit") is designed to diagnose fiber-optic lines in tactical or industrial networks with HMA connectors.
-
Optical Cable repair kit in the field - OPTOKON OMK-SR-FSK.2 OMK-SR-FSK optical fiber welding kit.OPTOKON's 2 is designed for field repair or restoration of mobile tactical optical cables. It includes an OSC-700 automatic welding machine, fiber processing tools, a sturdy transport case, and all necessary accessories.
-
CLN-04 Maintenance and Cleaning Tool Kits OPTOKON CLN-04 Maintenance Clean Kit — a specialized kit for cleaning fiber-optic connectors and optical network components (FON), ensuring proper maintenance, reducing signal loss, and increasing connection reliability. This kit is designed for professional use during installation, maintenance, and repair of optical cable systems.
-
OFT-920 Ruggedized Optical Test Set The OFT-920 ruggedized optical test set is designed for testing optical networks terminated with connectors in harsh environments. It combines both a light source and an optical power meter in one unit. This test set is ideal for the mining, petrochemical, and broadcast industries. The ruggedized aluminum case makes it perfect for field operations.
-
-
-
Fiber optic cables
- Passive fiber optic components
- Fiber optic patchcords
- Patch cords with LC, SC, FC, ST connectors
- Optical patch cord with SN connectors
- Optical patch cord with CS connectors
- LSH Patchcord
- Optical patch cord with MPO connectors (MTP)
- Optical patch cord with MT-RJ connectors
- Optical patch cord with SMA connectors
- Optical patch cord with MU connectors
- Optical patch cord with protected connector HE-IP67-XX
- Sealed waterproof connector for antenna connection
- AFOP armored optical patch cords
- Multi-fiber optical patch cords MFP
- Reference “master” patchcords
- MC patch cords (Singlemode-Multimode transition)
- Polarization maintaining (PM) optical patch cords
- Optical connectors
- Connecting adapters
- Attenuators, terminators
- Fiber optic patchcords
- Telecommunication equipment
- Industrial equipment
- Optical distribution systems
- Measurements and tools
- Production of optics
- Secure Network and Military equipment
- Perimeter security
- Active equipment of tactical networks
- LMES 230 V AC / 24 V DC power supply-for harsh operating conditions
- OPTOKON LMSP - 10.B is a rugged 10-inch computer (Rugged All-in-One System)
- LMRS-1A / LMRS-TD Nuclear Radiation Sensors
- OPTOKON AIRDA / XARDA - Secure Display terminal (Ruggedized Display Assistant)
- OPTOKON OEDX-20 - digital intercom system for vehicles
- Lightweight Mobile LMDS Data Switch
- LMC-01-GCS Gigabit Ethernet Mini Media Converter Ruggedized Typ
- LMCP-7H Compact, ultra-durable server
- LMCP-28H-NG Light Mobile Computing Platform
- LMSW-E33 Ruggedized 1-10 Gigabit Ethernet Layer 2 Managed PoE Switch
- LMSW-83M Ruggedized Gigabit Ethernet Layer 2 Managed PoE Switch
- Ruggedized Ethernet Media Converters
- LMSB-14-1G Ruggedized Switchboard Extension Gateway
- LMUPS-80-24V Ruggedized Uninterruptible Power Supply
- LMIPT-41 High-Class Rugged IP Phone
- LMSR-R63 Ruggedized Next-Gen Gigabit Router
- Passive Components for Ruggedized and Military Networks
- Hermaphroditic connectors with physical TFOCA contact
- Field patch cords of the HMA-JF series of ferulic type
- Hybrid Field Optical Patchcord HMA
- OPTOKON MCS Series — Mini Cable Splice for Optical Cables (MCS-02 / MCS-04)
- OPTOKON HMA Patchcord
- Cable reels for transporting and storing optical patch cords
- FCON Series 2-12 Fibers Rugged Field Ferrule Connector Patchcord
- LMCAB Series Ethernet Ruggedized Patchcords
- SMPTE LEMO FUW and PUW Patchcords
- LMCAB Ruggedized Cable Assemblies
- Equipment for measurement and maintenance of tactical networks
- OPTOKON OMK-SR-CLN.2 Fiber Optic Connector Cleaning Kit
- Optical Fiber Repair Kit Optokon SR-SPL-2
- A professional set of tools for installation and repair of fiber-optic communication lines UNI-2
- Diagnostic kit for fiber optic networks OMK-SR OTS-2
- Optical Cable repair kit in the field - OPTOKON OMK-SR-FSK.2
- CLN-04 Maintenance and Cleaning Tool Kits
- OFT-920 Ruggedized Optical Test Set
- Fiber optic cables

